CGA-320 Refill Adapter 24" Hose For SodaStream CO2 Tank Cylinder Connector US

Description

CGA-320 Refill Adapter 24" Hose For SodaStream CO2 Tank Cylinder Connector US
Description
Specifications and parameters:
Material: stainless steel and brass
Condition: 100% brand new, with pressure gauge，Has good air tightness, sturdiness, safety and reliability.
Hose length: 24 "
Working pressure: 0-2000 PSI
Large carbon dioxide fuel tank thread: CGA320 or W21.8-14
Suitable for paintball bottle thread: Tr21-4
We will put a red rubber round cap on the CGA320 or W21.8-14 nut to protect it from damage
Before the charging process, please put the small cylinder in the refrigerator to cool down to ensure that the small cylinder can be filled with more carbon dioxide gas.
1. Confirm that the on/off valve A and release valve C are closed(90 degrees to the ball valve body), and turn the pin knob B of the small cylinder adapter to the top (counterclockwise).
2.（ Put the gasket into the connector）Connect the connector (A end) to the large CO2 tank. (Tighten with a wrench. )
3. Connect the small cylinder  to the cylinder adapter (B end adapter).
4. Turn pin knob B down to touch cylinder pin slightly (clockwise)(if pressing the pin down too much, it will stop the gas enter by check valve when your filling cylinder of 6mm wide pin ）
5. Open the large Co2 tank valve.
6. Slowly open the on/off valve A (counterclockwise) and close it after 2-3 seconds, then open the release valve C release the residual gas in the small cylinder, and then remember to close the release valve C after this step ).
7. Carefully open the on/off valve A(20-30 degree Counterclockwise)to perform the charging process for 30-60 seconds, and then close the large carbon dioxide cylinder valve  (make sure the on/off A valve is open)
8. After filling, adjust the release knob B to the highest position and open the release valve C to release the residual gas in the hose.
9. After inflation, unscrew the small cylinder.
10. Repeat the filling process for each cylinder
Note:
1. If your big tank does not have a siphon, you should turn it over.
2. The cylinder should be empty. The pre-cooled cartridge will become very full.
3.  Check the bottle thimble before purchase. If the small bottle thimble is very thick, and it will be inflated difficulty, need replace thin thimble bottle.
4.Our adapter don't work RPV valve (residual pressure valve),please find picture as follow,but some of RPV valve can be removed by hex wrench,please check before ording. If your big tank has a RPV valve,you should order RPV valve pushing adapter from here.
Package Included:
1 x 24 inch stainless steel braided hose refill station.
Package Included
1 x 24 inch stainless steel braided hose refill station.
Features
Large carbon dioxide fuel tank thread: CGA320 or W21.8-14
Payment
Shipping
Returns
Contact Us
1. All payments must be prepaid.
2. We only accept payment via Paypal. Please kindly check if you can do the payment via PayPal before placing an order,Payment must be received within 7 days after order is made.
1. We are not responsible for undeliverable address. We reserve the right to charge the shipping fee again for returned items due to wrong address.
2. Items are generally shipped out the next business day after your payment has been cleared (Sat. & Sun. excluded.)
NOTE：Shipping:
The item will be shipped from our US warehouse to United States, which is more faster than from aboard.
2-7 working days to:USA
4-10 working days to:Canada
it may take a bit longer time, due to local dispatches ,
Customs checking, High Season period, eg. x'mas or other reasons. Your patience is always appreciated
2-7 working days to: USA
4-10 working days to: Canada
12-20 working days to: Other countries
We accept returns,Please contact us via ebay message if any problem you have before you send the item back.
1. We offer 30 days money back guarantee return policy.
2. Our warranty does not extended to any products that are physically damaged or that are not under normal operating conditions as a result of misuse or improper installation on the buyer/user's part.
3. In all cases, buyers pay shipping fees at their own cost to return products for exchange or refund. We will be responsible for the postage of replacements. Refund will be made upon receipt of the returned item.
Dear friend: Welcome to me my services are available: Monday To Friday: 8:30 to 18:00 (Beijing China time)
1. We are in different time zones, during the working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and considerable to give us a little more time.
2, please with ebay message if we made a deal on ebay. E-mail is often filtered as spam.
3, Please wait for our reply to your email, we will do our best to help you solve the problem.
Specifications and parameters:
Material: stainless steel and brass
Condition: 100% brand new, with pressure gauge，Has good air tightness, sturdiness, safety and reliability.
Hose length: 24 "
Working pressure: 0-2000 PSI
Large carbon dioxide fuel tank thread: CGA320 or W21.8-14
Suitable for paintball bottle thread: Tr21-4
We will put a red rubber round cap on the CGA320 or W21.8-14 nut to protect it from damage
Package Included:
1 x 24 inch stainless steel braided hose refill station.